firmware/src/packages/fff/fff-network/mipsel/network.tplink,c50-v4

. /lib/functions/fff/network

PORTORDER="0 1 2 3 4"

WANDEV=eth0
SWITCHDEV=eth0
CLIENT_PORTS="6t 3 4"
WAN_PORTS="6t 0"
BATMAN_PORTS="6t 1 2"

ROUTERMAC=$(cat /sys/class/net/eth0/address)
ETHMESHMAC=$(macFlipLocalBit "$(cat /sys/class/net/eth0/address)")
ramips/mt76x8: Add support for TP-Link Archer C50 v4 Add support for the TP-Link Archer C50 v4, a low-cost mt7628-based dual-band router. Label MAC address is on ethernet and 2.4 GHz WiFi. The v4 uses the same hardware as the v3 variant, but v4 includes the newer split uboot. ATTENTION: Initial flashing of this device requires additional steps: As all installation methods require an U-Boot to be integrated into the image (and we do not ship one with the image) we are not able to create an image in our build-process. Download a TP-Link image from their Website and a FFF/OpenWRT sysupgrade image for the device and build yourself a factory image like following: TP-Link image: tpl.bin OpenWRT sysupgrade image: owrt.bin > dd if=tpl.bin of=boot.bin bs=131584 count=1 > cat owrt.bin >> boot.bin This image can be used for Web-UI and recovery, but not TFTP. Additional instruction can be found in the OpenWrt commit 01dcd574a248 ("ramips: add support for Archer C50 v4") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Reviewed-by: Fabian Bläse <fabian@blaese.de> 2020-12-08 20:27:05 +01:00			`. /lib/functions/fff/network`

			`PORTORDER="0 1 2 3 4"`

			`WANDEV=eth0`
			`SWITCHDEV=eth0`
			`CLIENT_PORTS="6t 3 4"`
			`WAN_PORTS="6t 0"`
			`BATMAN_PORTS="6t 1 2"`

			`ROUTERMAC=$(cat /sys/class/net/eth0/address)`
			`ETHMESHMAC=$(macFlipLocalBit "$(cat /sys/class/net/eth0/address)")`