31 lines
1.2 KiB
Plaintext
31 lines
1.2 KiB
Plaintext
################
|
|
## This file is used to configure the behavior of network interfaces
|
|
## if the routers interfaces differ from the standard WAN+4LAN-Ports
|
|
## +2Wireless APs.
|
|
## If you want to change their behavior, you should edit the file
|
|
## /etc/network.config
|
|
## After that you have to reboot the router with following command.
|
|
#reboot
|
|
#
|
|
### The canonical syntax of this file is:
|
|
#SPECIFIER="MODE"
|
|
### MODES
|
|
## Generally there are 3 operating modes for network interfaces in fff.
|
|
#BATMAN: The interface is used to mesh with other fff-nodes
|
|
#WAN: The interface is used to connect to supernodes via vpn and
|
|
# ordinary internet.
|
|
#CLIENT: The interface is used to connect clients to the fff-net
|
|
##
|
|
### SPECIFIER
|
|
## For devices only including one ethernet port the specifier is called
|
|
## ETHMODE. The default mode for these devices is "BATMAN".
|
|
## For example this is the case for: gl-ar150, tl-mr3020-v1, tl-wa850re-v1,
|
|
## tl-wa860re-v1, tl-wa901nd-v2, ubnt-bullet-m, ubnt-loco-m-xw, ubnt-nano-m,
|
|
## ubnt-unifi
|
|
ETHMODE="CLIENT"
|
|
## Devices featuring 2 ethernet ports are configured by SPECIFIERs ressembling
|
|
## the labels on the PORT itself. For the cpe210 these are called LAN0 and LAN1.
|
|
## Therefore they are configured as follows:
|
|
LAN0MODE="WAN"
|
|
LAN1MODE="CLIENT"
|