With this patch all installed tables are flushed.
We no longer have to worry about the modules
installed or not. (nat, mangle ...)
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
With commit [1] the ipv4 firewall on wan interface was removed.
This patch adds the ssh connection limit for ipv4.
IPv6 is already limited.
[1] 52e15e072c ("fff-firewall: Remove ssh firewall on WAN interface")
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
[improve commit reference]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
The variables SERVICE_WRITE_PID and SERVICE_DAEMONIZE are not used by
procd, so they are removed.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
The configuration of our firewall depends on the network configuration.
Most importantly, the firewall has to be restarted, if the WAN-interface
is changed.
Therefore, a procd reload trigger is added to the init-script, so our
firewall is automatically restarted, when the network configuration is
changed.
Fixes: #46 (gitea)
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
[fabian@blaese.de: Remove unrelated changes]
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This firewall was introduced as a countermeasure for very slow routers
directly connected to the internet without any firewall.
Our routers have got quite a bit faster since then. Also, a setup like
this is highly uncommon, especially for slower routers.
Therefore this firewall rule is removed.
Fixes: #138
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
[bump PKG_RELEASE]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
In some cases (mostly for one-port devices) IF_WAN was used
although not set, resulting in not obviously iptables error
messages like
- Bad argument `conntrack'
- Bad argument `REJECT'
Thus, check whether IF_WAN is set to something before using it.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
The syntax " -m state --state " seems to be not supported anymore.
The replace should not change behavior compared to
lede-17.01-based firmware.
Added required dependency.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
- moves the node<-->client ra rules to package fff-uradvd
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Robert Langhammer
Fabian Bläse
Adrian Schmutzler
Tim Niemeyer
Christian Dresel