ath79/generic: add support for TP-Link WR710N v2.1
Flashing instructions: The factory image needs to be uploaded via the OEM firmware GUI. Notes: The device is implemented as two-port in OpenWrt, i.e. it has eth0/eth1 interfaces without switch setup. As our firmware currently does not support that, this uses a switch setup with one port for LAN. Attention: This only supports the v2.1 with has 8M flash. The v2.0 has 4M flash and will be bricked if this images is installed (however, the factory image is expected to be rejected by the OEM firmware). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
parent
31df0a3779
commit
ceaf8d70b8
|
@ -18,6 +18,7 @@ images=("openwrt-${chipset}-${subtarget}-glinet_gl-ar150-squashfs-*"
|
|||
"openwrt-${chipset}-${subtarget}-tplink_tl-wr1043nd-v4-squashfs-*"
|
||||
"openwrt-${chipset}-${subtarget}-tplink_tl-wr1043n-v5-squashfs-*"
|
||||
"openwrt-${chipset}-${subtarget}-tplink_tl-wr710n-v1-squashfs-*"
|
||||
"openwrt-${chipset}-${subtarget}-tplink_tl-wr710n-v2.1-squashfs-*"
|
||||
"openwrt-${chipset}-${subtarget}-tplink_tl-wr842n-v2-squashfs-*"
|
||||
"openwrt-${chipset}-${subtarget}-ubnt_bullet-m-squashfs-*"
|
||||
"openwrt-${chipset}-${subtarget}-ubnt_nanostation-loco-m-squashfs-*"
|
||||
|
|
|
@ -40,6 +40,8 @@ CONFIG_TARGET_DEVICE_ath79_generic_DEVICE_tplink_tl-wr1043n-v5=y
|
|||
CONFIG_TARGET_DEVICE_PACKAGES_ath79_generic_DEVICE_tplink_tl-wr1043n-v5=""
|
||||
CONFIG_TARGET_DEVICE_ath79_generic_DEVICE_tplink_tl-wr710n-v1=y
|
||||
CONFIG_TARGET_DEVICE_PACKAGES_ath79_generic_DEVICE_tplink_tl-wr710n-v1=""
|
||||
CONFIG_TARGET_DEVICE_ath79_generic_DEVICE_tplink_tl-wr710n-v2.1=y
|
||||
CONFIG_TARGET_DEVICE_PACKAGES_ath79_generic_DEVICE_tplink_tl-wr710n-v2.1=""
|
||||
CONFIG_TARGET_DEVICE_ath79_generic_DEVICE_tplink_tl-wr842n-v2=y
|
||||
CONFIG_TARGET_DEVICE_PACKAGES_ath79_generic_DEVICE_tplink_tl-wr842n-v2=""
|
||||
CONFIG_TARGET_DEVICE_ath79_generic_DEVICE_ubnt_bullet-m=y
|
||||
|
|
|
@ -0,0 +1,7 @@
|
|||
WANDEV=eth1
|
||||
SWITCHDEV=eth0
|
||||
CLIENT_PORTS="3 0t"
|
||||
WAN_PORTS=
|
||||
BATMAN_PORTS="0t"
|
||||
|
||||
ROUTERMAC=$(cat /sys/class/ieee80211/phy0/macaddress)
|
Loading…
Reference in New Issue