forked from freifunk-franken/firmware
Adrian Schmutzler
8fe7512ae5
Add support for the TP-Link Archer C50 v4, a low-cost mt7628-based dual-band router. Label MAC address is on ethernet and 2.4 GHz WiFi. The v4 uses the same hardware as the v3 variant, but v4 includes the newer split uboot. ATTENTION: Initial flashing of this device requires additional steps: As all installation methods require an U-Boot to be integrated into the image (and we do not ship one with the image) we are not able to create an image in our build-process. Download a TP-Link image from their Website and a FFF/OpenWRT sysupgrade image for the device and build yourself a factory image like following: TP-Link image: tpl.bin OpenWRT sysupgrade image: owrt.bin > dd if=tpl.bin of=boot.bin bs=131584 count=1 > cat owrt.bin >> boot.bin This image can be used for Web-UI and recovery, but not TFTP. Additional instruction can be found in the OpenWrt commit 01dcd574a248 ("ramips: add support for Archer C50 v4") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Reviewed-by: Fabian Bläse <fabian@blaese.de> |
||
---|---|---|
.. | ||
ar71xx-generic | ||
ath79-generic | ||
ath79-tiny | ||
default/root_file_system/etc | ||
ipq806x-generic | ||
mpc85xx-generic | ||
ramips-mt76x8 | ||
ramips-mt7621 | ||
ar71xx-generic.bsp | ||
ath79-generic.bsp | ||
ath79-tiny.bsp | ||
ipq806x-generic.bsp | ||
mpc85xx-generic.bsp | ||
ramips-mt76x8.bsp | ||
ramips-mt7621.bsp |