OpenWrt provides a function to set the local-bit in IP addresses.
This removes our custom function macFlipLocalBit() and switches to
the upstream version.
Note that technically the upstream version _sets_ the local bit,
i.e. only works one way, while our version _toggled_ the status.
Since we always start from addresses without the local bit set,
this is irrelevant for the given cases, though.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
So far, we define PORTORDER individually in each network.* file.
This creates a lot of duplications, and makes the code to parse those
values very ugly (and it's only used outside of configurenetwork
anyway).
Therefore, move the assignment to a library file, and wrap it into
a function for tidyness. This gives us more overview and nicer
implementation of the retrieval.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Christian Dresel <freifunk@dresel.systems>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Add support for the TP-Link Archer C50 v4, a low-cost mt7628-based
dual-band router.
Label MAC address is on ethernet and 2.4 GHz WiFi.
The v4 uses the same hardware as the v3 variant, but v4 includes
the newer split uboot.
ATTENTION:
Initial flashing of this device requires additional steps:
As all installation methods require an U-Boot to be integrated into the
image (and we do not ship one with the image) we are not able to create
an image in our build-process.
Download a TP-Link image from their Website and a FFF/OpenWRT sysupgrade
image for the device and build yourself a factory image like following:
TP-Link image: tpl.bin
OpenWRT sysupgrade image: owrt.bin
> dd if=tpl.bin of=boot.bin bs=131584 count=1
> cat owrt.bin >> boot.bin
This image can be used for Web-UI and recovery, but not TFTP.
Additional instruction can be found in the OpenWrt commit
01dcd574a248 ("ramips: add support for Archer C50 v4")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Adrian Schmutzler