forked from freifunk-franken/firmware
more explanation for network.mode file
Signed-off-by: Tobias Klaus <tk+ff@meskal.net> Reviewed-by: Christian Dresel <fff@chrisi01.de> Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This commit is contained in:
parent
cd50199cbb
commit
49975b9bd9
|
@ -1,18 +1,30 @@
|
|||
#what should the one eth0 ethernet port be used for?
|
||||
#directly connect to other mesh nodes - this is the default
|
||||
ETHMODE="BATMAN"
|
||||
|
||||
#Connect with fastd vpn
|
||||
#ETHMODE="WAN"
|
||||
|
||||
#connect normal ff-clients
|
||||
#ETHMODE="CLIENT"
|
||||
|
||||
################
|
||||
## If you want to change the behavior of eth0, you can change it above.
|
||||
## This file is used to configure the behavior of network interfaces
|
||||
## if the routers interfaces differ from the standard WAN+4LAN-Ports
|
||||
## +2Wireless APs.
|
||||
## If you want to change their behavior, you can do so below.
|
||||
## After that you have to reset the config with following commands.
|
||||
#cp /rom/etc/sysctl.conf /etc/sysctl.conf
|
||||
#cp /rom/etc/config/network /etc/config/network
|
||||
#reboot
|
||||
################
|
||||
|
||||
#
|
||||
### The canonical syntax of this file is:
|
||||
#SPECIFIER="MODE"
|
||||
### MODES
|
||||
## Generally there are 3 operating modes for network interfaces in fff.
|
||||
#BATMAN: The interface is used to mesh with other fff-nodes
|
||||
#WAN: The interface is used to connect to supernodes via vpn and
|
||||
# ordinary internet.
|
||||
#CLIENT: The interface is used to connect clients to the fff-net
|
||||
##
|
||||
### SPECIFIER
|
||||
## For devices only including one ethernet port the specifier is called
|
||||
## ETHMODE. The default mode for these devices is "BATMAN".
|
||||
## For example this is the case for: gl-ar150, tl-mr3020-v1, tl-wa850re-v1,
|
||||
## tl-wa860re-v1, ubnt-bullet-m, ubnt-loco-m-xw, ubnt-nano-m
|
||||
ETHMODE="BATMAN"
|
||||
## Devices featuring 2 ethernet ports are configured by SPECIFIERs ressembling
|
||||
## the labels on the PORT itself. For the cpe210 these are called LAN0 and LAN1.
|
||||
## Therefore they are configured as follows:
|
||||
LAN0MODE="WAN"
|
||||
LAN1MODE="BATMAN"
|
||||
|
|
Loading…
Reference in New Issue
Block a user