This sysfs option no longer exists.
The no_rebroadcast option was used as part of gluon’s
batman-adv-legacy implementation, after open-mesh decided
to not include it into batman-adv v14:
https://patchwork.open-mesh.org/patch/3434/
Our firmware has included (and enabled) it since December 2013.
With the upgrade to batman-adv v15 (pulled from openwrt-routing
then) in October 2017, the custom patch was no longer included.
It looks like open-mesh provides an equivalent built-in
solution now:
https://git.open-mesh.org/batman-adv.git/commit/a00797d8fa8fd1471e8be1ac23d506f76d866aaa
Thus, the option can be removed.
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
The "ipv4" option is used to enforce using ipv4 when
using dns for fastd remotes.
However this option was incorrectly always set which
makes ipv6 connections impossible.
Because enforcing ipv4 is not necessary, this option
is removed.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Fabian Bläse <fabian@blaese.de>
This is based on the configurehood-Patch from Tim Niemeyer.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This is based on a similar patch from Tim Niemeyer.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Instead of having 1000 routers accessing the KeyXchange in the
same second, this will dilute the request within a period of
15 seconds.
Same is done for queries from gateways.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
The V2 firmware requires initialization of the WiFi interfaces
by a hood file. If a one-port (or two-port) device is isolated,
it won't get this information from other WiFi nodes (w2sta mode).
In addition, it cannot be connected to the internet, as this would
require the port to be in WAN mode. It is also not possible to
connect a client device for configuration, since WiFi is not
configured and the LAN port is in BATMAN mode.
To enable configuration of an isolated one-port/two-port device,
this patch thus changes the default port config to CLIENT, so
the user can choose the desired configuration more easily.
For two-port, we will have one port WAN and the second port
CLIENT.
Fixes#110
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Harald Thuemmler <int@bnhof.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
The previous version seemed to work only for numeric data.
Fixes#113
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
nodewatcher and configurehood have both been run with */5 in micrond.
This may lead to nodewatcher accessing information just being
changed by configurehood. To prevent this, we just change the
start of configurehood, as this has no known disadvantages.
A change of the nodewatcher start would also solve the problem,
but nodewatcher is synchronized to the alfred-master and the
Monitoring.
Fixes#96.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
OpenWRT changed their structure to use sysctl.d subfiles.
The default sysctl.conf is empty and kernel.panic=3 is defined
elsewhere. Thus, we do not need sysctl.conf anymore.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
[Set PKG_RELEASE back to 1]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
The syntax " -m state --state " seems to be not supported anymore.
The replace should not change behavior compared to
lede-17.01-based firmware.
Added required dependency.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Refresh patches.
Bumps batman-adv to 2018.1
This goes beyond 18.06.0 since the release contains bug which
have been fixed in the later snapshots.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
[fabian@blaese.de: Use 18.06.1 for OpenWRT and packages]
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Fixes: #101
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Like the network.* files, this introduces wifi.* files to set
device-specific settings.
In contrast to the former, the wifi.* settings are only run during
firstboot and only if there is a file present.
In this patch, we set the antenna gain values for the devices not
treated correctly in OpenWRT.
Side conditions:
- The script requires 50-fff-boardname and 60-fff-wireless
beforehand, so I chose 62 as number.
- The wifi command is not necessary, since after firstboot
configurehood will run "wifi" in any case
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
- Changed to base on the ubnt board names
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
The vpn-select is used by fff-hoods.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Seems like the /etc/config/fff is owned by fff-config.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
By removing the reference to the hood file from vpn-select, we
remove the entire dependency from fff-hoodutils.
vpn-select will now work with any file provided, as long as
it has the correct syntax. At the moment, the only provider
is the configurehood script. Since the various hood file variants
are handled there, it seems logical that configurehood also
chooses and provides the correct hood file for vpn-select, instead
of vpn-select which had no other contact with hood file choice.
This is simple, tidy and effective.
Adjusted some comments.
Fixes#106
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
== is a bash specific alias for = , and
should not be used in #!/bin/sh scripts. Not in #!/usr/bin/haserl scripts
either, where the shell defaults to /bin/sh.
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
This is simpler than the previous approach and does not rely
on parsing.
This fixes:
- Interfaces being accounted for multiple times for certain
devices
- Errors when output of bridge function changes (as with the
current OpenWrt master)
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This patch suppresses the messages batman writes to
the kernel log when gw_mode is changed. This is done
to avoid spamming the log with negligible messages
when gw_mode is switched frequently.
Fixes: #93
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Timestamps in hood file currently only change if changes are
made. Thus, there is no reason to remove them for comparison.
This also fixes the wrong quote characters in the script, which
changed the script in a way the timestamps aren't removed right
now anyway.
After this change, a hood reconfiguration may be triggered by
just changing the timestamp at the keyxchange.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
With this patch, changing the hood file happens in
memory, so we do not have to write on flash "frequently".
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This will copy to hoodfilewww every 5 minutes!
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
At the moment, we use the same file for detecting changes in a
new hood file and for broadcasting the hood information to be used
by mesh routers.
However, there may be situations where we don't want to broadcast
an existing hoodfile. We, on the other hand, cannot delete it
then, as we need the file for checking changes in the temporary
hoodfile.
We also cannot just switch the wXconfig state to achieve this
goal, as we need a trigger to do that (which is the same file we
are discussing about).
So, in this patch, we introduce two files, one for the checksum
comparison and one for the hood info broadcast. Those can now be
set and deleted (in a later patch) as it is required by their
respective tasks. This should also improve code clarity to the
reader ...
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
To provide data processing information for SSH access without
annoying users too much, this adds a pointer to more extensive
information to the banner displayed after login.
The referenced files then contain similar information to what
is shown in the WebUI.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This adds a first version of data processing information to the
Web UI's settings page (where the information is entered).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
According to the upstream repo, vis_mode has been removed since
batman-adv 2014.0.0.
See openwrt-routing/packages 8a66ed1.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
To reduce the number of possible corner cases
in the first keyxchangev2 release, this patch
removes the sector file with the intention to
add it back after release.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
This patch allows to modify the bs-partition on the AC Mesh.
Without the patch, the bs partition on the AC Mesh is locked
forever. This can be a problem if
a) the bs partition has not been updated correctly during initial flash
b) the sysupgrade mechanism is altered by OpenWRT in order to account for
the flip flop layout
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Occationally /proc/net/if_inet6 contains interface IDs with
three digits. In this case, the regex in wait_for_ll_address()
does not work anymore and alfred is not starting.
This patch changes the evaluation so that fields are used instead
of the mere position by counting characters.
This is a backport from openwrt-routing and can be removed when
updating to OpenWRT 18.06, but not for newer versions of 17.01.
Fixes#98.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhgammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Fixes#95
This reverts commit 6cc6b4b786.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Fixes#68
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
In commit 5c1d3b1, conditions were changed so that "wifi" is called
almost every run directly before the network status (internet vs.
gateway contact vs. wXsta).
This causes strange effects configurehood and nodewatcher, which is
called at the same time.
The fix only does "wifi" if required and waits 10 sec. after that.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Fixes#83
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Just disable autoconf.
Some sysctl's are currently not available due some missing kernel
features. Maybe some day they reappear.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Robert Langhammer
Fabian Bläse
Adrian Schmutzler
Tim Niemeyer