This allows for more latitude when evaluating the addresses needed for br-mesh and ethmesh.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
The ROUTERMAC is not set in the network.* file. This causes a problem
when the ULA addresses are set based on the br-mesh MAC. If we just
add the ROUTERMAC, everything should be fine.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This puts the code for creating IPv6 addresses from MAC
address and EUI into functions, so it can be reused.
This should be particularly helpful if code is rewritten later.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Since names may change, this puts the relevant file names for
hood files into variables, so they can be changed at once
without the risk of forgetting some occurrences.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
While the hood file is only set by the keyexchange/hood, this
introduces a local additional configuration in a second file.
This file is retrieved from the first configap we got in w2sta
mode, of which we save the fdff address to identify it later.
Thus, a router always "knows" its specific uplink, as long as
the gateway connection is stable; otherwise: reset.
The implementation is similar to the hoodfiles with a tmp
version and a copy in the /www/public. On the "section head",
the initial configuration is located in /etc/sectorfile and
distributed from there to other nodes. Syntax should be like
the node file, except that it only contains the values to be
overwritten.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This prevents setup if a channel is missing (json defective)
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Since disabling 5 GHz is complicated with KeyXchange v2, we
enable it again.
This may lead to an instable device!
This reverts commit f47e046293.
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Since there is a PKG_NAME variable, there is no need to repeat
the individual package name five times.
This makes editing and particularly copying Makefiles much
easier, as only the PKG_NAME has to be changed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This fixes a missing /tmp/keyxchangev2data due to gateway
misconfiguration.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- Added double quote around $jsonfile
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Christian Dresel <fff@chrisi01.de>
This removes all references to community.cfg except in the
buildscript and except the file itself.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This is a first consolidation step which gets rid of
/tmp/fastd_fff_output, but still requires /etc/fastd/fff/peers/*
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This package connects to keyxchangev2
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
we need some little changes and copy some things to fff-hood later
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Need more parameters in wifiAddAP to add hidden AP
Need new function wifiAddSta to add a station and download hoodfile
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This is not compatible with the old Batman!
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Fixes: #55
This reintroduces the broken simple-tc.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
In src/packages/fff/fff-wireless/files/lib/functions/fff/wireless line 26:
local radio="radio$(echo $phy | tr -d -C [0-9])"
^-- SC2086: Double quote to prevent globbing and word splitting.
^-- SC2060: Quote parameters to tr to prevent glob expansion.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Bug: If /tmp/run/fastd.${project}.pid is missing, the directory
/proc/ is checked instead of /proc/{something}.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This writes CLIENT/BATMAN/WAN port configurations for devices
with switches to a separate file. This file can be changed
based on the desired setup and is then preserved during
firmware upgrade. In case of a future bugfix concerning the
entries of a specific network.* file, this will still be
effective as only the port configurations reside in the
new file, while the other settings could be overwritten by
the upgrade.
For one- and two-port devices, adjustments have been made so
that their relevant settings also reside in the new file now.
This also adds a WebUI interface for setting the two-port
devices (CPE210 and CPE510).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
- Changed doc in network.mode
This only sets the switch configs if they are not set yet.
If the network.* file is edited, add FORCEPARSE=1 to apply
the changes.
Fixes#56
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewd-by: Tobias Klaus <tk+ff@meskal.net>
- added quotes
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
The WR841 v12 is using the file from v11, the new file has never
been used.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Displays update notification for user, but does not provide
automatic updates. Version comparison is based on string match,
so build dates are not relevant.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Michael Fritscher <fff@mifritscher.de>
This reverts commit d6f2f18e49.
The Netmon is gone, so this workaround is not needed any longer.
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
- Removed micrond dependency and rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
This reads the MAC address independent of option macaddr being set
in /etc/config/network. Tested (mesh only) on AR150, CPE210,
Pico M2HP and WR841 v10.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Restricts password to A-Z, a-z, 0-9 and !#$%()*+,.:;=?@^_
Fixes#40
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Fixes: #41
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Fixes#30
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
deleted some trailing whitespaces
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
This patch adds support for the WR841N v12. For TFTP recovery, the
image name has to be wr841nv11_tp_recovery.bin (with 11, not 12)!
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Dieses Patch fügt den Support für den WR1043 v4 hinzu. Dieses Patch
baut auf den LEDE Patch auf und darf erst nach dem LEDE Patch
applied werden.
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- This will fix the LEDs on LEDE
- We will lose the power heartbeat trigger on the LED
- We will lose the VPN signaling on the LEDs
While remove the default system config, the LEDE system now
configures wrong ntp service. We fix this by deleting these
entries in the fff-timeserver package.
If the file is already present on the devices, we need to upgrade it.
Therefore the 05-config-system-migration is now part of the fff-sysupgrade
package.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Unfortunately the sysupgrade.conf is installed by base-files. The installed file
just contains examples and will be overwritten with this.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
- removes e.g. dnsmasq, firewall
- needs to add some of the basic packages to fff-base
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
The error only occurs if there isn't any network connection.
Fixes#23
Also added prevention for applying empty coordinates.
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Because we want to test this tunneldigger version in order to move on
with https://github.com/wlanslovenija/firmware-packages-opkg/pull/10
Signed-off-by: Steffen Pankratz <kratz00@gmx.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Robert Langhammer rlanghammer@web.de
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
5Ghz AdHoc is not working with current ath10k driver.
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Michael Fritscher <michael@fritscher.net>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
cleaned up config files (moved commands to script)
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Jan Kraus <mayosemmel@gmail.com>
The current broker is no longer cutting off the first character from UUID
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Steffen Pankratz <kratz00@gmx.de>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Jan Kraus <mayosemmel@gmail.com>
Flashing of stock firmware is different for different devices.
At least on TP-Link Images it's not working via sysupgrade.
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- SC2006: Use $(..) instead of deprecated `..`
- SC2086: Double quote to prevent globbing and word splitting.
- SC2046: Quote this to prevent word splitting.
- SC2012: Use find instead of ls to better handle non-alphanumeric filenames.
- SC2004: $ on variables in (( )) is unnecessary.
- SC2016: Expressions don't expand in single quotes, use double quotes for that.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
- fixed typo in same line
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
On some devices cpuinfo returns no "system type". For that devices the
"platform" tag contains the relevant chipset information.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
- two more tabs to spaces
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
- mv /etc/network.* files to package
- mv /etc/config/network to package
- also removes the bsp specific root_file_system
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Tested-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Changed mode of configurenetwork to 755
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
The script is only included in ar71xx builds and only executes on the
cpe210 v1.1 hardware.
It is intended to be called from /etc/rc.local.fff_userconfig since the
state of poe passthrough is reset on each reboot.
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
First functionality is the possibility to have a file
/etc/init.d/fff-userconfig on the nodes that is execeuted
on each reboot and survives sysupgrades
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
- Whitespaces fixed
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
- remove httpd from .config
- remove httpd startup from rc.local
- add crawldata path creation in nodewatcher
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
- moves the node<-->client ra rules to package fff-uradvd
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
- Make GEO strings smaller to prevent breaking layout
- Specify E-Mail insted of Kontakt (Monitoring will need the E-Mail)
Signed-off-by: Dominik Heidler <dominik@heidler.eu>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
modified: src/packages/fff/fff-web/files/www/ssl/settings.js
This patch adds a prefix advertisment for each node. Every node get also
the IPs
* $prefix::MAC
* $prefix::link-local
* $prefix::1
::1 is duplicated so we need filtering to not forward data into the
network for ::1.
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
- Add Link to Monitoring Page (Description is the Link)
- Add <a> tag to Position to preserve style
- Set "FFF Router :: $hostname" as Title
Signed-off-by: Dominik Heidler <dominik@heidler.eu>
Reviewed-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
With micrond it is possible that every package has its own crontab.
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
Reviewed-by: Steffen Pankratz <kratz00@gmx.de>