uci-defaults scripts are supposed to be run once after firstboot
and then removed. However, the removal only takes place if the
subshell created for the sourced scripts returns exit code 0.
For some of the files, the last command returned a different exit
code, though, leading to the script remaining in its location and
being executed for every boot.
To prevent cases like the latter, this adds an "exit 0" to all
uci-defaults files in our package store. While at it, remove the
shebang for all these files since they are sourced (and not
executed).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
The ubnt-power-m-xw identifier was introduced in 0447d0c709
("fff-boardname: introduce new ubnt boards") assuming that the
Ubiquiti Powerbeam M2 XW had a separate model identifier in
/var/sysinfo/model (otherwise, it was derived from loco-m-xw image).
However, OpenWrt has never known about a PowerBeam device. Consequently,
on devices nothing changed, and all PowerBeam devices were still
recognized as Nanostation Loco M XW.
Thus, this patch removes all references to a ubnt-power-m-xw, as it's
never been working anyway.
Note that this also implies that any user of a PowerBeam would have
used the wrong antenna_gain values of the Loco M XW by default (and
will continue to do so).
However, actually the Loco M XW has never been tested or supported
officially for this firmware. The image was only used for the
support of the Powerbeam M2 XW in 68314ea943 ("Add support for
Powerbeam M2 XW"). However, since the firmware is expected to work
and seems to be installed on several devices already, we won't remove
the image for now.
For further reference:
The board and model names set in ar71xx are found in the OpenWrt file
target/linux/ar71xx/base-files/lib/ar71xx.sh
Fixes: 0447d0c709 ("fff-boardname: introduce new ubnt boards")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
The WiFi configuration scripts have been moved to an earlier point
in initialization sequence in c39de8f7d5 ("fff-wireless: initialize
WiFi config before setting up wXsta"), which has them run before
the script setting board name in uci config files. Since the script
setting manual antenna gain and fixing rssileds depends on having a
board name, though, the move broke this functionality.
Since the board name set up script itself does not depend on anything
else in the uci-defaults scripts, let's move this one to a relatively
early point in initialization (and save us from touching anything
else).
Fixes: c39de8f7d5 ("fff-wireless: initialize WiFi config before setting up wXsta")
Fixes: #135
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
PKG_VERSION is meant to refer to the version of external packages,
as we do e.g. in the tunneldigger package.
For our own packages, we just need the PKG_RELEASE variable.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
[Rebased onto current state of master]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Currently, Makefile use a mixture of tabs and spaces with various
indents. This harmonizes all Makefiles to use tab indentation only.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This is the correct firmware for the Unifi AC Mesh I have only
tested at Unifi AC Mesh and not at Unifi AC lite But my information
is, that both have the same Hardware
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This patch achieves multiple goals:
- Align WR841 boardnames with image names
- Fix wrong name replace in sysupgrade
- Support sysupgrade of WR841 v12
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Since there is a PKG_NAME variable, there is no need to repeat
the individual package name five times.
This makes editing and particularly copying Makefiles much
easier, as only the PKG_NAME has to be changed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
5Ghz AdHoc is not working with current ath10k driver.
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Michael Fritscher <michael@fritscher.net>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>