As odhcpd is used as router advertisement server in layer3 variant,
but configurenetwork is still necessary, the dependency to fff-uradvd has
to be removed.
This is done by first checking, if the fff-uradvd service exists, before it
is restarted.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
On layer3 variant ("gateway firmware"), 60-fff-gateway.conf
changes "forwarding" for all interfaces, overwriting the
changes from 51-fff-network-$iface.conf.
By putting the WAN-specific commands after 60-fff-gateway.conf
this patch should provide the correct device-specific value
for WAN interface now.
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[Rephrased commit title and added message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This interface was using 1500 anyway and setting ethernet to
MTU > 1500 might not be a good idea.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langammer <rlanghammer@web.de>
This provides the CPUPORT which is needed for the gateway firmware.
The script is supposed to be sourced.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This fixes a typo in description and introduces a single variable
for the sysctlfile.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
tcp timestamps can improve tcp performance a lot, especially
with unstable networks like wifi.
Linux default behaviour is enabled so the tcp timestamps setting
is removed from sysctl configuration.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
When setting up a node, router solicitations can be used to speed
up receiving router advertisements a lot. This mechanism has been
previously disabled by our custom sysctl config.
However because linux does not send router solicitations, if it
doesn't accept router advertisements, which is disabled for every
link except WAN, this option can safely be set to it's default value
for all interfaces.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Fixes: #101
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Fixes#83
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Just disable autoconf.
Some sysctl's are currently not available due some missing kernel
features. Maybe some day they reappear.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
If the mac is read from /sys/class/net/${iface}/address, some
devices (WA860RE, Picostation) will not set the fdff addresses.
This can be fixed by using the $ROUTERMAC in configurenetwork.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Previously, IPv6 addresses were constructed by reading from
the device config file in the function. To have more options,
it is better to use the address itself as parameter.
By this way we can decide what we use for getting the MAC when
calling.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This is a cosmetical patch, however it does increase the overview
a lot in my opinion.
We cannot drop the special case of the two-port devices, because
we need the current setup to enable setting port mode in the Web
UI.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Since we change only the network part of uci, we only need to
commit this part and not the whole config five times.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Using wifi devices makes it possible to get mac address
without having to configure wifi networks.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Tested-By: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
- Increment package version
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
This makes use of the SWITCHDEV variable to ensure that the
correct interface is used for mac address fixing on devices,
that do not use eth0 for the switch.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
This allows for more latitude when evaluating the addresses needed for br-mesh and ethmesh.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This puts the code for creating IPv6 addresses from MAC
address and EUI into functions, so it can be reused.
This should be particularly helpful if code is rewritten later.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This writes CLIENT/BATMAN/WAN port configurations for devices
with switches to a separate file. This file can be changed
based on the desired setup and is then preserved during
firmware upgrade. In case of a future bugfix concerning the
entries of a specific network.* file, this will still be
effective as only the port configurations reside in the
new file, while the other settings could be overwritten by
the upgrade.
For one- and two-port devices, adjustments have been made so
that their relevant settings also reside in the new file now.
This also adds a WebUI interface for setting the two-port
devices (CPE210 and CPE510).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
- Changed doc in network.mode
This only sets the switch configs if they are not set yet.
If the network.* file is edited, add FORCEPARSE=1 to apply
the changes.
Fixes#56
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Dieses Patch fügt den Support für den WR1043 v4 hinzu. Dieses Patch
baut auf den LEDE Patch auf und darf erst nach dem LEDE Patch
applied werden.
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
5Ghz AdHoc is not working with current ath10k driver.
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Michael Fritscher <michael@fritscher.net>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
cleaned up config files (moved commands to script)
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Jan Kraus <mayosemmel@gmail.com>
- mv /etc/network.* files to package
- mv /etc/config/network to package
- also removes the bsp specific root_file_system
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Changed mode of configurenetwork to 755
Signed-off-by: Tim Niemeyer <tim@tn-x.org>