The SPDX license identifier provides a standardized way for specifying
licenses that is both human- and machine-readable. It is used upstream
both in OpenWrt and the Linux kernel.
Replace licenses in our repository by those identifiers.
The full-text licenses corresponding to these identifiers are
provided in the LICENSES folder.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Fabian Bläse <fabian@blaese.de>
We use the one-port implementation also on two-ports like the
Nanostation M. Therefore, hard-coding eth0 in configurenetwork
will break if the port implemented for the one-port setup
(SWITCHDEV/WANDEV) is not eth0.
Just use SWITCHDEV instead, like done for the rest of the one-port
setup.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
The owipcalc tool provides an "add" algorithm which can be used
to concateneted IPv6 addresses from prefix and suffix.
Since it's available upstream and our string manipulation is ugly,
let's replace our IP concatenation with that tool. The package
consists of a single .c file with about 1000 lines resulting in
about 4 kB for the ipk package.
This patch does _not_ introduce any conceptual changes yet. Thus,
the "wrong" IPv6 prefix from KeyXchange will be expected in the
same format, it is just healed for the new code for now.
The change allows to get rid of some bloat, i.e. some quite trivial
custom functions on the way. This also drops the ipTidyColon()
function, as owipcalc seems to return the collapsed version by default.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
The name br-mesh is actually quite misleading, since the bridge
actually includes the "client" interfaces. In order to make this
obvious, and to prevent confusion with the properly named wXmesh
interfaces, rename them to br-client.
Note that br-mesh is also particularly disturbing for the layer 3
firmware without batman-adv.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Fabian Bläse <fabian@blaese.de>
Acked-by: Christian Dresel <freifunk@dresel.systems>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
For historic reasons, the wan interface is set to eth1 as default
value. When updating the config for one-port devices in
configurenetwork, the same value is put there again if the mode
is switched to something != WAN, instead of just removing the
value.
While ifname actually is a mandatory value, this has been handled
inconsistently in the past, where ethmesh ifname was deleted, and
wan ifname was just changed back to eth1, when assigning the
actually relevant eth0 to a different task.
This concept was set up with a one-port device in mind, i.e. a
device where there is no eth1. However, this very setup routine
got applied to the Nanostation M as well (which is treated as
as one-port), where we suddenly have two interfaces and the eth1
exists.
So, while the user assumes it's unconfigured, the second port
actually becomes set up as WAN if the first one is != WAN.
If connected to a second device with CLIENT (=default) to provide
PoE there, this will create a loop.
So, finally, in order to somehow fix this mess, this patch just
changes the hardcoded "eth1" to "eth2". While this is no proper
fix, it perpetuates the original idea of keeping wan set to
something, but nothing which actually exists. However, there are
no sideeffects and we keep this minimal-invasive.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This seems to be a copy/paste error, what we want here is to
delete the entry from ethmesh, as we use WAN.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Until now, IPv6 connectivity was only ensured by some custom sysctls.
OpenWrt has a proper way of enabling IPv6 client (SLAAC, as well as DHCPv6)
for an interface. Switching to OpenWrt's way of configuring client addresses
for an interface might also make configuration more reliable, as the appropriate
sysctls are now set by netifd. Especially OnePort and TwoPort devices will
benefit from this change, as IPv6 auto configuration does not have to be manually
enabled and disabled for a physical interface, but rather is set as an option for
our logical wan interface.
At the same time this change enables DHCPv6 client support for WAN.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[bump PKG_RELEASE]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Because nodewatcher is executed using a cron, but
our cron has no way to report the origin of a specific
log entry, a 'nodewatcher:' prefix is added to all debug
output.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Debug output is written to stderr now.
Therefore the output is happening in real time and
the current date and time are not necessary anymore.
Typically the date and time are added by the syslog
daemon.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This applies some tiny improvements to just-moved nodewatcher.d code:
- Remove comments about obvious things
- Introduce newlines to make code easier to read
- Use shorter conditional syntax for easy cases
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This splits up the data extraction/assembly of the nodewatcher
script into several parts and distributes them across packages, so
that each nodewatcher.d subscript is located in the package providing
the relevant functionality. This allows to extend the nodewatcher data
by enabling/disabling packages.
This scheme is not perfectly fulfilled for fff-network vs. fff-wireless,
as data cannot uniquely assigned there and the XML syntax does not allow
separation anyway.
In general, this moves code without applying code improvements, yielding
at an easy comparison of moved fragments. However, the following changes
were done to improve experience:
- The function writing debug output has been renamed from "err" to "debug"
- Since we catch the stdout of the nodewatcher.d functions anyway,
those scripts were adjusted to echo output directly instead of first
writing it into a variable and then outputting it at the end.
- The uci config has been kept, but initialization for the network part
has been moved to the fff-network package.
- Space indent has been changed to tab, which is more common in the
firmware and requires less space.
- Remove support for nodewatcher run without uci config. Script-based
nodewatcher on other platforms will have altered code anyway, and
splitting it up will prevent effective use as a blueprint for those
cases. After this change, nodewatcher in firmware is supposed to be
used only for this firmware.
Note that since the nodewatcher.d scripts are evaluated by using their
echo output, having a function created uncaught output to stdout there
will corrupt the XML.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
[rebase and adjustments for current master, use simpler mechanism to
call nodewatcher.d scripts, use tab indent, remove debug() definition
where not needed, do not remove uci config, add commit message, use
echo -n]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
[remove 'local' modifier for variable not inside a function, fix typo]
Signed-off-by: Fabian Bläse <fabian@blaese.de>
As odhcpd is used as router advertisement server in layer3 variant,
but configurenetwork is still necessary, the dependency to fff-uradvd has
to be removed.
This is done by first checking, if the fff-uradvd service exists, before it
is restarted.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
On layer3 variant ("gateway firmware"), 60-fff-gateway.conf
changes "forwarding" for all interfaces, overwriting the
changes from 51-fff-network-$iface.conf.
By putting the WAN-specific commands after 60-fff-gateway.conf
this patch should provide the correct device-specific value
for WAN interface now.
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[Rephrased commit title and added message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This fixes a typo in description and introduces a single variable
for the sysctlfile.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Fixes#83
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Just disable autoconf.
Some sysctl's are currently not available due some missing kernel
features. Maybe some day they reappear.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
If the mac is read from /sys/class/net/${iface}/address, some
devices (WA860RE, Picostation) will not set the fdff addresses.
This can be fixed by using the $ROUTERMAC in configurenetwork.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Previously, IPv6 addresses were constructed by reading from
the device config file in the function. To have more options,
it is better to use the address itself as parameter.
By this way we can decide what we use for getting the MAC when
calling.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This is a cosmetical patch, however it does increase the overview
a lot in my opinion.
We cannot drop the special case of the two-port devices, because
we need the current setup to enable setting port mode in the Web
UI.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Since we change only the network part of uci, we only need to
commit this part and not the whole config five times.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
This makes use of the SWITCHDEV variable to ensure that the
correct interface is used for mac address fixing on devices,
that do not use eth0 for the switch.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
This allows for more latitude when evaluating the addresses needed for br-mesh and ethmesh.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This puts the code for creating IPv6 addresses from MAC
address and EUI into functions, so it can be reused.
This should be particularly helpful if code is rewritten later.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This writes CLIENT/BATMAN/WAN port configurations for devices
with switches to a separate file. This file can be changed
based on the desired setup and is then preserved during
firmware upgrade. In case of a future bugfix concerning the
entries of a specific network.* file, this will still be
effective as only the port configurations reside in the
new file, while the other settings could be overwritten by
the upgrade.
For one- and two-port devices, adjustments have been made so
that their relevant settings also reside in the new file now.
This also adds a WebUI interface for setting the two-port
devices (CPE210 and CPE510).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
- Changed doc in network.mode
This only sets the switch configs if they are not set yet.
If the network.* file is edited, add FORCEPARSE=1 to apply
the changes.
Fixes#56
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Dieses Patch fügt den Support für den WR1043 v4 hinzu. Dieses Patch
baut auf den LEDE Patch auf und darf erst nach dem LEDE Patch
applied werden.
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
5Ghz AdHoc is not working with current ath10k driver.
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Michael Fritscher <michael@fritscher.net>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
cleaned up config files (moved commands to script)
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Changed mode of configurenetwork to 755
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Adrian Schmutzler
Fabian Bläse
Tim Niemeyer
Robert Langhammer
Christian Dresel