Dropbear supports ed25519 keys since OpenWrt 21.02.
Also, ecdsa is supported since v19.07, but disabled in our firmware.
Keep the generated ed25519 and ecdsa host key accross upgrades.
While at it, remove dss host keys, as they are not supported anymore.
5eb7864aadd5 ("dropbear: rewrite init script startup logic to handle both host key files")
8a7a93947004 ("dropbear: remove generation and configuration of DSS keys")
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
PKG_BUILD_DIR has the following default values set in include/package.mk,
in case no BUILD_VARIANT is set:
With PKG_VERSION set: $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
Without PKG_VERSION: $(BUILD_DIR)/$(PKG_NAME)
Consequently, all PKG_BUILD_DIR definitions in our packages are
redundant. Remove them.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Build/Prepare and Build/Configure are not required for packages
which only contain local files and do not need any compilation.
Remove them.
Note that Build/Compile needs to be present and empty to overwrite
the defaults, though.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
On modern targets in OpenWrt, the board name follows the
"vendor,model" syntax. Since commas in file names are uncommon
and ugly, file names use the same pattern with an underscore,
"vendor_model".
Since this also applies to image file names, this patch
adjusts fff-upgrade.sh to replace the comma from board name
by an underscore for all devices. This should be possible
without harm as OpenWrt images can safely be expected to
either contain a comma in the right place or no comma at all.
It has been discussed whether the same should be applied to
the network.* files as well. However, expecting those to
be removed in the foreseeable future does make this undesirable,
as a lot of code would be inserted now and be removed again a few
months later, only to fix the name for one device.
For the same reason, we won't touch the board name replace
for the TL-WDR4900 v1 for now.
Suggested-by: Fabian Bläse <fabian@blaese.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
The old name "sysupgrade.sh" is easy to be confused with OpenWrt's
/sbin/sysupgrade. Rename our script to clearly indicate its
purpose.
While at it, move from /etc to /sbin, as the former is an odd location
for an executable script.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
In OpenWrt commit 055cdab2bb22 ("uclient: add ALTERNATIVES for wget")
uclient is registered as ALTERNATIVES provider for wget. Since
the priority for busybox as provider is lowest, this overwrites
the link set for /usr/bin/wget, now pointing to uclient wget.
However, uclient wget does not support IPv6 link-local addresses,
as it's not aware of the "%" to separate address from link identifier.
To prevent wget from failing when those addresses are used, this
patch explicitly uses busybox wget.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
PKG_VERSION is meant to refer to the version of external packages,
as we do e.g. in the tunneldigger package.
For our own packages, we just need the PKG_RELEASE variable.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
[Rebased onto current state of master]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This is just meant to make image names shorter.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Currently, Makefile use a mixture of tabs and spaces with various
indents. This harmonizes all Makefiles to use tab indentation only.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
[Set PKG_RELEASE back to 1]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Code which is reused by other functionalities is put into the
fff-hoodutils package, so it can be used without including
configurehood.
This also allows setting missing dependencies of other packages.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This moves the FFF configuration from
/etc/config/system to a new file /etc/config/fff. Thus,
this file can be copied as a whole during upgrade (with
compatibility provided) and then resulting values in
other files are re-set later.
This also fixes the bandwidth settings not being persistent
during upgrade. Other settings may join ...
I tried to go through all the code and update all occurrences
of the relevant system variables (looking for "system" both
in GitHub and my local src folder).
Note that a downgrade will result in loss of configuration!
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
This patch achieves multiple goals:
- Align WR841 boardnames with image names
- Fix wrong name replace in sysupgrade
- Support sysupgrade of WR841 v12
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Since there is a PKG_NAME variable, there is no need to repeat
the individual package name five times.
This makes editing and particularly copying Makefiles much
easier, as only the PKG_NAME has to be changed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This removes all references to community.cfg except in the
buildscript and except the file itself.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This reverts commit d6f2f18e49.
The Netmon is gone, so this workaround is not needed any longer.
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
- Removed micrond dependency and rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>