So far, we have meta packages and config packages for the variants
in parallel, e.g. fff-node and fff-variant-node.
Since the sole purpose of the meta packages is to define
dependencies, one can just merge them into the corresponding config
packages to reduce overhead.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
In some cases (mostly for one-port devices) IF_WAN was used
although not set, resulting in not obviously iptables error
messages like
- Bad argument `conntrack'
- Bad argument `REJECT'
Thus, check whether IF_WAN is set to something before using it.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
In OpenWrt commit 055cdab2bb22 ("uclient: add ALTERNATIVES for wget")
uclient is registered as ALTERNATIVES provider for wget. Since
the priority for busybox as provider is lowest, this overwrites
the link set for /usr/bin/wget, now pointing to uclient wget.
However, uclient wget does not support IPv6 link-local addresses,
as it's not aware of the "%" to separate address from link identifier.
To prevent wget from failing when those addresses are used, this
patch explicitly uses busybox wget.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
As odhcpd is used as router advertisement server in layer3 variant,
but configurenetwork is still necessary, the dependency to fff-uradvd has
to be removed.
This is done by first checking, if the fff-uradvd service exists, before it
is restarted.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
On layer3 variant ("gateway firmware"), 60-fff-gateway.conf
changes "forwarding" for all interfaces, overwriting the
changes from 51-fff-network-$iface.conf.
By putting the WAN-specific commands after 60-fff-gateway.conf
this patch should provide the correct device-specific value
for WAN interface now.
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[Rephrased commit title and added message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
babeld filters routes before announcing them with the
redistribute filters.
Users might add unknown public subnets to the client interface,
so redistribute filters have to be generated for these addresses.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
This adds two checks:
- Does gateway config exist?
- Does gateway config version match?
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
In d9ec8edb15 ("batman-adv: Move from DEBUGFS to batctl") we
switched from deprecated DEBUGFS to batctl.
Despite debugfs, batctl seems to also have deprecated sysfs
(https://www.open-mesh.org/news/90).
This patch thus replaces a reference to iface_status by the
corresponding batctl command.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This renames two options for wireguard interfaces in
/etc/config/gateway:
public_key -> remote_public_key
private_key -> local_private_key
Signed-off-by: Alexander Gutzeit <alexander.gutzeit@web.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
[adjusted commit message/title, added version bump, remove
rename for network config]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
"ip" is one of the most essential tools on a gateway. At the moment
there is only one dependency to the metapackage ip from the nodewatcher,
which pulls ip-tiny. Dropping the nodewatcher causes a fallback to the
busybox built-in ip-command.
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
[fabian@blaese.de: rebase onto master]
Signed-off-by: Fabian Bläse <fabian@blaese.de>
This package adds gateway.d scripts which create
peering interfaces using wireguard.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
When the user removes a peer from /etc/config/gateway,
the script has to be able to find any leftover configurations
that have been created for it.
This can be made very easy by prepending a prefix to every
automatically generated configuration.
This also allows to remove the nasty check for the babeld default interface.
Therefore the naming check for cfg* also can be removed.
As a side effect all manually created configuration blocks that do not match a
prefix will not be touched by configuregateway.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Various things have to be done for every interface on
which babeld shall run.
Those procedures are moved into functions to reduce duplicate code.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This adds a line containing the device name and the current
firmware version to the MOTD shown after logging in via SSH, e.g.
> TP-Link TL-WR1043N/ND v2 @ jubtl9_20190320
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Previously, when configurehood switched status, all WiFi devices
were completely rewritten and all interfaces were deleted and
recreated. This is both unnecessary and ugly.
This patch redesigns WiFi setup to create all interfaces (in
parallel) initially, and then only to enable/disable them as
necessary. Where reconfiguration is necessary, only the variable
parts are changed.
Since most of the wifi-device config is already created by
OpenWrt, this builds based on the existing wifi-devices and
only removes the default wifi-ifaces.
This patch will not change the logic (codeflow) of configurehood,
but only affects how action on the WiFi devices/interfaces is
taken.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
The two different names "wXmesh" and "wXibss" have no functional
purpose and are just for indication. Remove this distinction, so
mesh is just mesh.
This will make further adjustment easier and clearer.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[Bump PKG_RELEASE and SCRIPT_VERSION]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
The symbols BUSYBOX_CONFIG_WGET and
BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT are set in different
packages and do not correlate with where Busybox wget is
actually used.
This updates packages dependencies based on the current
situation.
Note that with current firmware, both two versions of wget
are installed:
/bin/wget
/usr/bin/wget
The latter is from busybox and is used as the default version.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
PKG_VERSION is meant to refer to the version of external packages,
as we do e.g. in the tunneldigger package.
For our own packages, we just need the PKG_RELEASE variable.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
[Rebased onto current state of master]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Although this tag is very old, this is how PKG_VERSION is meant
to be used.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This hasn't been used since it was replaced. Remove it.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Because DNS Forwarding is done by dnsmasq which we configure
inside the fff-dhcp package, the configuration scripts for dns
are placed in this package.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
User configuration for layer3 firmware is stored in
/etc/config/gateway. To preserve this file across updates it
is added to sysupgrade.conf
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
fff-gateway is mandatory when compiling layer3 firmware.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This will prevent batman-adv packet fragmentation on 802.11s mesh.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This interface was using 1500 anyway and setting ethernet to
MTU > 1500 might not be a good idea.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langammer <rlanghammer@web.de>
When running OpenWrt master, "type <functionname>" only returns
"<functionname> is a function". Thus, to make the implementation
future-proof and since it is also working with the current state,
change the grep in execute_subshell to match "function".
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
At the moment sysupgrade via WebUI is broken on many devices.
This is reproducible: While the (few) status messages seem
normal, the device boots again with the old firmware.
Sysupgrade via SSH always works.
The sysupgrade call in upgrade.html directly uses the path of
the uploaded firmware file as argument. From several tests and
based on caught stdout/stderr from this line, it looks like haserl
deletes the uploaded firmware file due to a hidden trigger before
or even while it is processed by sysupgrade.
The easiest way to work around that is to just rename the file
before using it as argument to sysupgrade. This will preserve the
file DURING sysupgrade. If sysupgrade fails explicitly (status
code != 0), remove the file to provide sufficient memory for
another upload.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This adds scripts to configure vlan and client network.
This also adds sysctl settings to enable forwarding.
Note:
Devices specific properties are sourced from fff-network package.
This creates a dependency on fff-boardname and fff-network.
These properties should be located elsewhere in the future.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This provides the CPUPORT which is needed for the gateway firmware.
The script is supposed to be sourced.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This adds a configuration script for applying hostname,
coordinates, hoodname and contact address.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This introduces a new script for simple gateway configuration.
The main configuregateway script is able to execute functions
for various steps like 'configure' or 'apply' from scripts in /etc/gateway.d.
This makes it easy to distribute configuration to the appropriate packages.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Since batctl can suppress headers, we do not have to count lines.
Cosmetical change.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This might reduce the chance to break devices with 32 MB RAM
during sysupgrade.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
The debug filesystem will be deprecated and disabled by default
in newer versions of B.A.T.M.A.N.
This patch switches our code to the batctl, as recommended.
Since batctl can suppress headers, this actually makes our life
easier ...
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This fixes a typo in description and introduces a single variable
for the sysctlfile.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
This is just meant to make image names shorter.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Currently, Makefile use a mixture of tabs and spaces with various
indents. This harmonizes all Makefiles to use tab indentation only.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Since we went on to the KeyXchangeV2, fff-vpn-select is a pure
subpackage/utility of fff-hoods. Thus, we should not manually
select it, but have it selected indirectly by fff-hoods.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
tcp timestamps can improve tcp performance a lot, especially
with unstable networks like wifi.
Linux default behaviour is enabled so the tcp timestamps setting
is removed from sysctl configuration.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This Package adds a router advertisement daemon and
appropriate Freifunk Franken specific configuration for it.
The ra_default option is set to '2' to force the default flag,
even if no default route for ipv6 is present.
This is necessary, because otherwise fc00::/7 targets would be
unreachable, since odhcpd is unable to send specific routes inside a RA.
This won't affect clients ability to reach hosts which have a dual stack
connection, typical network stacks prefer IPv4 over IPv6 ULA when no
public IPv6 address is available.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Configuration of Router Advertisements is done in a seperate package.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
This device is still in PR state in OpenWrt, since ar71xx target
is deprecated and thus lacking reviewers.
It worked nicely for me anyway, so I include the current state of
the PR (has not changed for months).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
With our dynamic resetting of WiFi interfaces, the rssileds
of OpenWrt do not work correctly. This disables them as a
workaround, since they otherwise create about 20 % CPU load.
Since the MACH file for all CPE210/510 is the same, no adjustment
of the OpenWrt-tiny patch is needed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
The proxy only sends data from alfred master to the Monitoring.
It does not require the device to produce alfred-data in the
nodewatcher itself.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
The wget from busybox we are using ignores the -t option,
although it does not throw errors in the currently used version.
However, specifying the -t option in calls where it is not used
is misleading, so it should be removed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This improves the curl call by:
- Using full executable path
- Removing redundant -X POST
- Using --data-binary instead of --data
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
By using the alfred2 mechanism of the Monitoring, we get rid
of the embracing {"64":...} key-value construct.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
CC: kratz00@gmx.de
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
- Changed subject
- Changed curl parameters
- Added firewall rule
- Configure alfred to be master
- Add fff-nodewatcher as dep, because we use the alfred config
- Change data handling during curl to pipe
- Add newline on cron rule
Signed-off-by: Fabian Bläse <fabian@blaese.de>
- Fix alfred master mode introduced by packaging alfred
- Adjust monitoring-proxy waittime to suggestion
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This firewall blocks all communication with fe80::1 from a
Client to Batman and to the Node.
We need this because some crap devices (e.g. a wrongly
connected router on a clientport) have fe80::1 as address
and break our setup.
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
When using local hoodfile neither this nor central hoodfile
downloaded earlier should be offered to neighbours, so remove it
from the webroot.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Instead of overwriting local variable to local hoodfile location,
copy it to the commonly used location. This makes the local hoodfile
behave exactly like central hoodfiles, which prevents some border cases.
The previous behaviour mainly caused issues when using getJsonPath() and
getUpgradePath() from fff-hoodutils.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This make it easier to use new targets without subtarget.
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Based on the documentation, BLA will only help if two nodes
are connected via WiFi AND via Ethernet cable on CLIENT ports!
For a "correct" setup, e.g. WiFi and BATMAN port connection,
BLA won't have an effect.
Since the former case is possible and there are no known
drawbacks, we enable BLA.
This removes the line to disable BLA, so it will be enabled as
B.A.T.M.A.N. enables it by default.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
This shows the configured peers for fastd and L2TP.
Note that "configured" does not tell whether they are working.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Instead of manually overwriting basic and supported rates,
this patch makes use of a new OpenWRT option "legacy_rates",
which disables 802.11b data rates.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
So far, the Monitoring evaluates hoods based on their names.
This introduces several problems, most prominently a hood
re-creation if it is renamed at the KeyXchange.
Since we have unique hood IDs in the KeyXchange and the
Monitoring retrieves those via hoods.php, it is logical use this
information instead of relying on string comparison.
This requires the hood files to contain an additional field "id".
While this has not been implemented, the changes in this patch
will still work and just write empty data to the uci field and
alfred data.
For local hoods, the "id" in the hood file will remain unset.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
When setting up a node, router solicitations can be used to speed
up receiving router advertisements a lot. This mechanism has been
previously disabled by our custom sysctl config.
However because linux does not send router solicitations, if it
doesn't accept router advertisements, which is disabled for every
link except WAN, this option can safely be set to it's default value
for all interfaces.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Since the MacNocker was introduced, the hood information in
UCI is DELETED if the hood is lost.
If the router still successfully sends alfred data in this state,
the Monitoring will treat it as a V1 device. This is annoying,
especially since it looks like a loop.
An easy solution is to send an empty <hood> field in those cases,
as V2 routers are detected by them knowing their hood.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This sysfs option no longer exists.
The no_rebroadcast option was used as part of gluon’s
batman-adv-legacy implementation, after open-mesh decided
to not include it into batman-adv v14:
https://patchwork.open-mesh.org/patch/3434/
Our firmware has included (and enabled) it since December 2013.
With the upgrade to batman-adv v15 (pulled from openwrt-routing
then) in October 2017, the custom patch was no longer included.
It looks like open-mesh provides an equivalent built-in
solution now:
https://git.open-mesh.org/batman-adv.git/commit/a00797d8fa8fd1471e8be1ac23d506f76d866aaa
Thus, the option can be removed.
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
The "ipv4" option is used to enforce using ipv4 when
using dns for fastd remotes.
However this option was incorrectly always set which
makes ipv6 connections impossible.
Because enforcing ipv4 is not necessary, this option
is removed.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Fabian Bläse <fabian@blaese.de>
This is based on the configurehood-Patch from Tim Niemeyer.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This is based on a similar patch from Tim Niemeyer.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Instead of having 1000 routers accessing the KeyXchange in the
same second, this will dilute the request within a period of
15 seconds.
Same is done for queries from gateways.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
The V2 firmware requires initialization of the WiFi interfaces
by a hood file. If a one-port (or two-port) device is isolated,
it won't get this information from other WiFi nodes (w2sta mode).
In addition, it cannot be connected to the internet, as this would
require the port to be in WAN mode. It is also not possible to
connect a client device for configuration, since WiFi is not
configured and the LAN port is in BATMAN mode.
To enable configuration of an isolated one-port/two-port device,
this patch thus changes the default port config to CLIENT, so
the user can choose the desired configuration more easily.
For two-port, we will have one port WAN and the second port
CLIENT.
Fixes#110
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Harald Thuemmler <int@bnhof.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
The previous version seemed to work only for numeric data.
Fixes#113
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>