The vpn-select is used by fff-hoods.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Seems like the /etc/config/fff is owned by fff-config.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
By removing the reference to the hood file from vpn-select, we
remove the entire dependency from fff-hoodutils.
vpn-select will now work with any file provided, as long as
it has the correct syntax. At the moment, the only provider
is the configurehood script. Since the various hood file variants
are handled there, it seems logical that configurehood also
chooses and provides the correct hood file for vpn-select, instead
of vpn-select which had no other contact with hood file choice.
This is simple, tidy and effective.
Adjusted some comments.
Fixes#106
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
== is a bash specific alias for = , and
should not be used in #!/bin/sh scripts. Not in #!/usr/bin/haserl scripts
either, where the shell defaults to /bin/sh.
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
This is simpler than the previous approach and does not rely
on parsing.
This fixes:
- Interfaces being accounted for multiple times for certain
devices
- Errors when output of bridge function changes (as with the
current OpenWrt master)
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Timestamps in hood file currently only change if changes are
made. Thus, there is no reason to remove them for comparison.
This also fixes the wrong quote characters in the script, which
changed the script in a way the timestamps aren't removed right
now anyway.
After this change, a hood reconfiguration may be triggered by
just changing the timestamp at the keyxchange.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
With this patch, changing the hood file happens in
memory, so we do not have to write on flash "frequently".
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This will copy to hoodfilewww every 5 minutes!
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
At the moment, we use the same file for detecting changes in a
new hood file and for broadcasting the hood information to be used
by mesh routers.
However, there may be situations where we don't want to broadcast
an existing hoodfile. We, on the other hand, cannot delete it
then, as we need the file for checking changes in the temporary
hoodfile.
We also cannot just switch the wXconfig state to achieve this
goal, as we need a trigger to do that (which is the same file we
are discussing about).
So, in this patch, we introduce two files, one for the checksum
comparison and one for the hood info broadcast. Those can now be
set and deleted (in a later patch) as it is required by their
respective tasks. This should also improve code clarity to the
reader ...
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
To provide data processing information for SSH access without
annoying users too much, this adds a pointer to more extensive
information to the banner displayed after login.
The referenced files then contain similar information to what
is shown in the WebUI.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This adds a first version of data processing information to the
Web UI's settings page (where the information is entered).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
According to the upstream repo, vis_mode has been removed since
batman-adv 2014.0.0.
See openwrt-routing/packages 8a66ed1.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
To reduce the number of possible corner cases
in the first keyxchangev2 release, this patch
removes the sector file with the intention to
add it back after release.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Fixes#95
This reverts commit 6cc6b4b786.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Fixes#68
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
In commit 5c1d3b1, conditions were changed so that "wifi" is called
almost every run directly before the network status (internet vs.
gateway contact vs. wXsta).
This causes strange effects configurehood and nodewatcher, which is
called at the same time.
The fix only does "wifi" if required and waits 10 sec. after that.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Fixes#83
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Just disable autoconf.
Some sysctl's are currently not available due some missing kernel
features. Maybe some day they reappear.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
The simplest and fasted way to
Fixes#72
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Code which is reused by other functionalities is put into the
fff-hoodutils package, so it can be used without including
configurehood.
This also allows setting missing dependencies of other packages.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This addresses a bunch of issues:
- Previously, only the presence of w2configap was checked. With
only 5 GHz, this would have caused a recreation every 5 min.
(Note that this is only valid for a 5 GHz only device, as we
always create all interfaces for disabled radios)
- The two outer if-statements are merged
- We now check for presence of wXmesh to enable wXconfigap. Although
this is no necessity (as the hood file contains the whole config)
this assumes that a disabled wXmesh means no intent of the owner
to connect to other devices on this radio.
- With the dependency of wXconfigap from wXmesh, this patch now
enables the deactivation of hood file transmitting by disabling
meshing in the hood file
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Bug 1: If devices with hidden SSID are present, the matched
SSID in the awk contains the newline (="unknown\n\t"). This
destroys the table after the sort.
Bug 2: If SSIDs contain ampersands (yes, people do that),
they are now converted to &.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
The actual calculation is done in the Monitoring.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This adds data about the clients per interface
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
This is a workaround to enable alfred on routers which do not see
a configap during initial boot.
Fixes: #78
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
The AR150 seems to have the same MAC address on eth0, eth1 and
phy0. Although it is not a ONEPORT, we can use the shifted bit
like for the ONEPORT devices to get a distinct ETHMESHMAC.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Instead of using the hiddenapflag file, we can just check whether
the hood file copy used by the webserver is present. As a second
condition, we check whether the w2configap is not configured yet.
This fixes the following minor issue:
Previously, if configurehood has run once, the hiddenapflag was
set, but the configap not set up yet. If then a restart happens,
the flag is gone (/tmp), but not recreated until a change in the
hood file appears. Thus, no configap would be set up until that
point.
Since we check for a real condition now, this can't be happening.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Changes:
- Remove first line (headline) previously parsed as gateway
- Delete leading whitespaces for netif correctly (regex
"\\[" changed to "\\[ *")
- Remove netif whitespaces first, so they are not changed to
"false"
- Include trailing whitespace in regex for selection marker
- Remove useless replacement " " to " "
This is designed to support BATMAN compatibility version 14 AND 15
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
If the mac is read from /sys/class/net/${iface}/address, some
devices (WA860RE, Picostation) will not set the fdff addresses.
This can be fixed by using the $ROUTERMAC in configurenetwork.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Previously, IPv6 addresses were constructed by reading from
the device config file in the function. To have more options,
it is better to use the address itself as parameter.
By this way we can decide what we use for getting the MAC when
calling.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This is a cosmetical patch, however it does increase the overview
a lot in my opinion.
We cannot drop the special case of the two-port devices, because
we need the current setup to enable setting port mode in the Web
UI.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Add a complete hoodfile to /etc/hoodfile to use only this file
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
- Changed according to Adrian's review
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This patch additional information to the nodewatcher XML:
- wlan_channel: Channel of interface (number only)
- wlan_ssid: SSID available through iw dev
- wlan_type: Type of interface (AP, mesh, IBSS)
- wlan_width: Width of frequency band (20 vs. 40 MHz, number only)
The nodewatcher file from this patch can be copied manually to
devices with older firmware.
The patch includes some comment typo fixes.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
To prevent connecting hoods, this patch loads keyxchange files
from the local network (eth0.3/eth0) before it uses the gateway.
Thus, if other files are provided via wXconfigap, they are just
ignored. If a router is connected to two hoods by cable, it will
just disable the interfaces where a second hood file is detected
and wait until the next call of configurehood.
If cable and wXmesh are different, the cable has precedence.
If two hoods are present via cable on the same eth, wXmesh has
precedence.
If two hoods are present via cable on different eth, the first
eth has precedence and all others are disabled.
If cable has precedence, wXmesh is configured with the hood
file from cable.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
The configurehood script is started at the same time for all
routers. Thus, if one router sets up its configap, another may
just go into wXsta at the very same moment. This creates a race
condition between configap setup and wXsta download.
To circumvent this, we add a sleep to the wXsta routine, so the
wXsta always comes later, but is still run every 5 minutes.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This is the correct firmware for the Unifi AC Mesh I have only
tested at Unifi AC Mesh and not at Unifi AC lite But my information
is, that both have the same Hardware
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
We need the new tunneldigger because the old broker no longer works with the current kernel.
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Since we change only the network part of uci, we only need to
commit this part and not the whole config five times.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This includes the new options introduced due to the
/etc/config/fff file into the WebUI.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Update notification is enabled by default. If required, this
allows disabling it permanently.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This implements an upgrade safe solution for the PoE passthrough
on multiple devices. Since LEDE already provides the relevant
settings, a check whether those are in place enables both
identification of affected devices and automatic deactivation
if parameters are changed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This moves the FFF configuration from
/etc/config/system to a new file /etc/config/fff. Thus,
this file can be copied as a whole during upgrade (with
compatibility provided) and then resulting values in
other files are re-set later.
This also fixes the bandwidth settings not being persistent
during upgrade. Other settings may join ...
I tried to go through all the code and update all occurrences
of the relevant system variables (looking for "system" both
in GitHub and my local src folder).
Note that a downgrade will result in loss of configuration!
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This patch introduced more detailed information about the
hood in the WebUI, i.e. channel and SSIDs.
The patch includes a reorganization of the columns.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-By: Fabian Bläse <fabian@blaese.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Using wifi devices makes it possible to get mac address
without having to configure wifi networks.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Tested-By: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
- Increment package version
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
During system boot, the dependency of alfred to the bat0
interface is problematic. In some circumstances (no eth mesh
and no wifi mesh), the mesh interfaces are disabled, the
bat0 interface is removed and the station mode is entered.
Because alfred is started after the station mode (current
boot order), it doesn't start up with the missing bat0 interface.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Some JSON beautifiers put spaces between identifier and value.
This is necessary to tolerate that.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This makes use of the SWITCHDEV variable to ensure that the
correct interface is used for mac address fixing on devices,
that do not use eth0 for the switch.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Move the variable definition to the implementation file. This is more
intuitive and the variable is not used otherwise.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
We only want to remove WiFi interfaces, not devices during
reconfiguration. This still allows for complete reconfiguration,
but does not remove device attributes like a disabled 5 GHz or
similar.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Some MAC adresses were forgotten/not updated in a previous
patch. This is fixed now.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This is based on the LEDE pull request as on 2017-10-17.
Tested successfully on device (including flashing factory
image, no TFTP).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This patch achieves multiple goals:
- Align WR841 boardnames with image names
- Fix wrong name replace in sysupgrade
- Support sysupgrade of WR841 v12
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
This adds information to the switch port overview and shows
the VLAN configuration. For some routers the port order is
provided, so the physical arrangement is resembled in the
Web UI.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This allows for more latitude when evaluating the addresses needed for br-mesh and ethmesh.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
The ROUTERMAC is not set in the network.* file. This causes a problem
when the ULA addresses are set based on the br-mesh MAC. If we just
add the ROUTERMAC, everything should be fine.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This puts the code for creating IPv6 addresses from MAC
address and EUI into functions, so it can be reused.
This should be particularly helpful if code is rewritten later.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Since names may change, this puts the relevant file names for
hood files into variables, so they can be changed at once
without the risk of forgetting some occurrences.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
While the hood file is only set by the keyexchange/hood, this
introduces a local additional configuration in a second file.
This file is retrieved from the first configap we got in w2sta
mode, of which we save the fdff address to identify it later.
Thus, a router always "knows" its specific uplink, as long as
the gateway connection is stable; otherwise: reset.
The implementation is similar to the hoodfiles with a tmp
version and a copy in the /www/public. On the "section head",
the initial configuration is located in /etc/sectorfile and
distributed from there to other nodes. Syntax should be like
the node file, except that it only contains the values to be
overwritten.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This prevents setup if a channel is missing (json defective)
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Since disabling 5 GHz is complicated with KeyXchange v2, we
enable it again.
This may lead to an instable device!
This reverts commit f47e046293.
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Since there is a PKG_NAME variable, there is no need to repeat
the individual package name five times.
This makes editing and particularly copying Makefiles much
easier, as only the PKG_NAME has to be changed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This fixes a missing /tmp/keyxchangev2data due to gateway
misconfiguration.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- Added double quote around $jsonfile
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Christian Dresel <fff@chrisi01.de>
This removes all references to community.cfg except in the
buildscript and except the file itself.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This is a first consolidation step which gets rid of
/tmp/fastd_fff_output, but still requires /etc/fastd/fff/peers/*
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This package connects to keyxchangev2
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
we need some little changes and copy some things to fff-hood later
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Need more parameters in wifiAddAP to add hidden AP
Need new function wifiAddSta to add a station and download hoodfile
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This is not compatible with the old Batman!
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Fixes: #55
This reintroduces the broken simple-tc.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
In src/packages/fff/fff-wireless/files/lib/functions/fff/wireless line 26:
local radio="radio$(echo $phy | tr -d -C [0-9])"
^-- SC2086: Double quote to prevent globbing and word splitting.
^-- SC2060: Quote parameters to tr to prevent glob expansion.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Bug: If /tmp/run/fastd.${project}.pid is missing, the directory
/proc/ is checked instead of /proc/{something}.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This writes CLIENT/BATMAN/WAN port configurations for devices
with switches to a separate file. This file can be changed
based on the desired setup and is then preserved during
firmware upgrade. In case of a future bugfix concerning the
entries of a specific network.* file, this will still be
effective as only the port configurations reside in the
new file, while the other settings could be overwritten by
the upgrade.
For one- and two-port devices, adjustments have been made so
that their relevant settings also reside in the new file now.
This also adds a WebUI interface for setting the two-port
devices (CPE210 and CPE510).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
- Changed doc in network.mode
This only sets the switch configs if they are not set yet.
If the network.* file is edited, add FORCEPARSE=1 to apply
the changes.
Fixes#56
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewd-by: Tobias Klaus <tk+ff@meskal.net>
- added quotes
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
The WR841 v12 is using the file from v11, the new file has never
been used.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Displays update notification for user, but does not provide
automatic updates. Version comparison is based on string match,
so build dates are not relevant.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Michael Fritscher <fff@mifritscher.de>
This reverts commit d6f2f18e49.
The Netmon is gone, so this workaround is not needed any longer.
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
- Removed micrond dependency and rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
This reads the MAC address independent of option macaddr being set
in /etc/config/network. Tested (mesh only) on AR150, CPE210,
Pico M2HP and WR841 v10.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Restricts password to A-Z, a-z, 0-9 and !#$%()*+,.:;=?@^_
Fixes#40
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Fixes: #41
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Fixes#30
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
deleted some trailing whitespaces
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
This patch adds support for the WR841N v12. For TFTP recovery, the
image name has to be wr841nv11_tp_recovery.bin (with 11, not 12)!
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Dieses Patch fügt den Support für den WR1043 v4 hinzu. Dieses Patch
baut auf den LEDE Patch auf und darf erst nach dem LEDE Patch
applied werden.
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- This will fix the LEDs on LEDE
- We will lose the power heartbeat trigger on the LED
- We will lose the VPN signaling on the LEDs
While remove the default system config, the LEDE system now
configures wrong ntp service. We fix this by deleting these
entries in the fff-timeserver package.
If the file is already present on the devices, we need to upgrade it.
Therefore the 05-config-system-migration is now part of the fff-sysupgrade
package.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Unfortunately the sysupgrade.conf is installed by base-files. The installed file
just contains examples and will be overwritten with this.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
- removes e.g. dnsmasq, firewall
- needs to add some of the basic packages to fff-base
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
The error only occurs if there isn't any network connection.
Fixes#23
Also added prevention for applying empty coordinates.
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Because we want to test this tunneldigger version in order to move on
with https://github.com/wlanslovenija/firmware-packages-opkg/pull/10
Signed-off-by: Steffen Pankratz <kratz00@gmx.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Robert Langhammer rlanghammer@web.de
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
5Ghz AdHoc is not working with current ath10k driver.
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Michael Fritscher <michael@fritscher.net>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
cleaned up config files (moved commands to script)
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Jan Kraus <mayosemmel@gmail.com>
The current broker is no longer cutting off the first character from UUID
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Steffen Pankratz <kratz00@gmx.de>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Jan Kraus <mayosemmel@gmail.com>
Flashing of stock firmware is different for different devices.
At least on TP-Link Images it's not working via sysupgrade.
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- SC2006: Use $(..) instead of deprecated `..`
- SC2086: Double quote to prevent globbing and word splitting.
- SC2046: Quote this to prevent word splitting.
- SC2012: Use find instead of ls to better handle non-alphanumeric filenames.
- SC2004: $ on variables in (( )) is unnecessary.
- SC2016: Expressions don't expand in single quotes, use double quotes for that.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
- fixed typo in same line
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
On some devices cpuinfo returns no "system type". For that devices the
"platform" tag contains the relevant chipset information.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
- two more tabs to spaces
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
- mv /etc/network.* files to package
- mv /etc/config/network to package
- also removes the bsp specific root_file_system
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Tested-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Changed mode of configurenetwork to 755
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
The script is only included in ar71xx builds and only executes on the
cpe210 v1.1 hardware.
It is intended to be called from /etc/rc.local.fff_userconfig since the
state of poe passthrough is reset on each reboot.
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
First functionality is the possibility to have a file
/etc/init.d/fff-userconfig on the nodes that is execeuted
on each reboot and survives sysupgrades
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
- Whitespaces fixed
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
- remove httpd from .config
- remove httpd startup from rc.local
- add crawldata path creation in nodewatcher
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
- moves the node<-->client ra rules to package fff-uradvd
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
- Make GEO strings smaller to prevent breaking layout
- Specify E-Mail insted of Kontakt (Monitoring will need the E-Mail)
Signed-off-by: Dominik Heidler <dominik@heidler.eu>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
modified: src/packages/fff/fff-web/files/www/ssl/settings.js
This patch adds a prefix advertisment for each node. Every node get also
the IPs
* $prefix::MAC
* $prefix::link-local
* $prefix::1
::1 is duplicated so we need filtering to not forward data into the
network for ::1.
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
- Add Link to Monitoring Page (Description is the Link)
- Add <a> tag to Position to preserve style
- Set "FFF Router :: $hostname" as Title
Signed-off-by: Dominik Heidler <dominik@heidler.eu>
Reviewed-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
With micrond it is possible that every package has its own crontab.
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
Reviewed-by: Steffen Pankratz <kratz00@gmx.de>
Tim Niemeyer
Adrian Schmutzler
Robert Langhammer
Fabian Bläse
Christian Dresel