COMMITCOUNT allows to have the PKG_RELEASE calculated automatically
based on the number of commits for the package folder.
AUTORELEASE will count the number of commits since the last upstream
bump. This is relevant for packages with PKG_VERSION or
PKG_SOURCE_DATE set, but will not work for us since it assumes the
use of certain identifiers in commit titles.
COMMITCOUNT works fine for most of our packages, with the following
exceptions:
* fff-nodewatcher would yield a commit count of 55, while the
current PKG_RELEASE is 61. Thus, we do not touch it for now.
* Packages that have been renamed will start counting from 1 after
the rename, since folder renames are not tracked by git. This
will result in descreasing PKG_RELEASE after the change for
these packages.
However, since moving essentially creates a new package anyway,
counting from 1 makes sense conceptually, and PKG_RELEASE is
still replaced for these packages.
* alfred-json and fff-macnock use upstream code and thus would
normally require AUTORELEASE. As discussed above, this will
not work for us, so just leave these two untouched.
Note that all this is quite irrelevant for the way we use packages
currently, as without opkg PKG_RELEASE does not matter to us anyway.
So, let's just be happy about not having to bump PKG_RELEASE
anymore, while keeping the basic functionality intact.
The only package where the PKG_RELEASE is actually used for
something is fff-nodewatcher, where the version will be displayed
in the Monitoring.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[fabian@blaese.de: rebase, add new packages]
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Johannes Kimmel <fff@bareminimum.eu>
PKG_BUILD_DIR has the following default values set in include/package.mk,
in case no BUILD_VARIANT is set:
With PKG_VERSION set: $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
Without PKG_VERSION: $(BUILD_DIR)/$(PKG_NAME)
Consequently, all PKG_BUILD_DIR definitions in our packages are
redundant. Remove them.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Build/Prepare and Build/Configure are not required for packages
which only contain local files and do not need any compilation.
Remove them.
Note that Build/Compile needs to be present and empty to overwrite
the defaults, though.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This patch moves device support for ar71xx devices that are supported
in ath79. Building them with ath79 will be the new default.
The only devices remaining in ar71xx will be the following, as backporting
them to openwrt-19.07 is too complicated:
- cpe210-v1
- cpe510-v1
Accordingly, no tiny devices are left in ar71xx and we can drop the relevant
patches, and build ar71xx as generic again.
For the tl-wr741nd-v2, in ath79 the tplink_tl-wr741-v1 image is used.
The move from ar71xx to ath79 requires some adjustments on the way:
- The board names and image names on ath79 contain the vendor name,
where the former have it separated by a comma (tplink,cpe210-v2)
and the latter use an underscore (tplink_cpe210-v2). It is
safe to assume that this is the only difference between board and
image names.
Consequently, the ath79 devices will use their full board name also
in our firmware. A lot of renames in fff-boardname can be dropped.
The rename for fff-sysupgrade is already present in fff-upgrade.sh
While at it, fix that for the WDR4900 v1 as well.
- Due to a different switch driver, the startup of ethernet devices
is altered, which leads to eth0 and eth1 being swapped for some ath79
devices compared to ar71xx. This has been adjusted for SWITCHDEV/WANDEV
and MAC address setup.
- Since we have direct support for the AC Mesh now, use the proper
name instead of the AC Lite image. For Ubiquiti, different device
variants are now available as separate images.
- Remove left-over power-m-xw entry in cpuport file
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
uci-defaults scripts are supposed to be run once after firstboot
and then removed. However, the removal only takes place if the
subshell created for the sourced scripts returns exit code 0.
For some of the files, the last command returned a different exit
code, though, leading to the script remaining in its location and
being executed for every boot.
To prevent cases like the latter, this adds an "exit 0" to all
uci-defaults files in our package store. While at it, remove the
shebang for all these files since they are sourced (and not
executed).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
The ubnt-power-m-xw identifier was introduced in 0447d0c709
("fff-boardname: introduce new ubnt boards") assuming that the
Ubiquiti Powerbeam M2 XW had a separate model identifier in
/var/sysinfo/model (otherwise, it was derived from loco-m-xw image).
However, OpenWrt has never known about a PowerBeam device. Consequently,
on devices nothing changed, and all PowerBeam devices were still
recognized as Nanostation Loco M XW.
Thus, this patch removes all references to a ubnt-power-m-xw, as it's
never been working anyway.
Note that this also implies that any user of a PowerBeam would have
used the wrong antenna_gain values of the Loco M XW by default (and
will continue to do so).
However, actually the Loco M XW has never been tested or supported
officially for this firmware. The image was only used for the
support of the Powerbeam M2 XW in 68314ea943 ("Add support for
Powerbeam M2 XW"). However, since the firmware is expected to work
and seems to be installed on several devices already, we won't remove
the image for now.
For further reference:
The board and model names set in ar71xx are found in the OpenWrt file
target/linux/ar71xx/base-files/lib/ar71xx.sh
Fixes: 0447d0c709 ("fff-boardname: introduce new ubnt boards")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
The WiFi configuration scripts have been moved to an earlier point
in initialization sequence in c39de8f7d5 ("fff-wireless: initialize
WiFi config before setting up wXsta"), which has them run before
the script setting board name in uci config files. Since the script
setting manual antenna gain and fixing rssileds depends on having a
board name, though, the move broke this functionality.
Since the board name set up script itself does not depend on anything
else in the uci-defaults scripts, let's move this one to a relatively
early point in initialization (and save us from touching anything
else).
Fixes: c39de8f7d5 ("fff-wireless: initialize WiFi config before setting up wXsta")
Fixes: #135
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
PKG_VERSION is meant to refer to the version of external packages,
as we do e.g. in the tunneldigger package.
For our own packages, we just need the PKG_RELEASE variable.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
[Rebased onto current state of master]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Currently, Makefile use a mixture of tabs and spaces with various
indents. This harmonizes all Makefiles to use tab indentation only.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This is the correct firmware for the Unifi AC Mesh I have only
tested at Unifi AC Mesh and not at Unifi AC lite But my information
is, that both have the same Hardware
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This patch achieves multiple goals:
- Align WR841 boardnames with image names
- Fix wrong name replace in sysupgrade
- Support sysupgrade of WR841 v12
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Since there is a PKG_NAME variable, there is no need to repeat
the individual package name five times.
This makes editing and particularly copying Makefiles much
easier, as only the PKG_NAME has to be changed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
5Ghz AdHoc is not working with current ath10k driver.
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Michael Fritscher <michael@fritscher.net>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Adrian Schmutzler
Fabian Bläse
Tim Niemeyer
Christian Dresel