COMMITCOUNT allows to have the PKG_RELEASE calculated automatically
based on the number of commits for the package folder.
AUTORELEASE will count the number of commits since the last upstream
bump. This is relevant for packages with PKG_VERSION or
PKG_SOURCE_DATE set, but will not work for us since it assumes the
use of certain identifiers in commit titles.
COMMITCOUNT works fine for most of our packages, with the following
exceptions:
* fff-nodewatcher would yield a commit count of 55, while the
current PKG_RELEASE is 61. Thus, we do not touch it for now.
* Packages that have been renamed will start counting from 1 after
the rename, since folder renames are not tracked by git. This
will result in descreasing PKG_RELEASE after the change for
these packages.
However, since moving essentially creates a new package anyway,
counting from 1 makes sense conceptually, and PKG_RELEASE is
still replaced for these packages.
* alfred-json and fff-macnock use upstream code and thus would
normally require AUTORELEASE. As discussed above, this will
not work for us, so just leave these two untouched.
Note that all this is quite irrelevant for the way we use packages
currently, as without opkg PKG_RELEASE does not matter to us anyway.
So, let's just be happy about not having to bump PKG_RELEASE
anymore, while keeping the basic functionality intact.
The only package where the PKG_RELEASE is actually used for
something is fff-nodewatcher, where the version will be displayed
in the Monitoring.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[fabian@blaese.de: rebase, add new packages]
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Johannes Kimmel <fff@bareminimum.eu>
The SPDX license identifier provides a standardized way for specifying
licenses that is both human- and machine-readable. It is used upstream
both in OpenWrt and the Linux kernel.
Replace licenses in our repository by those identifiers.
The full-text licenses corresponding to these identifiers are
provided in the LICENSES folder.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Fabian Bläse <fabian@blaese.de>
PKG_BUILD_DIR has the following default values set in include/package.mk,
in case no BUILD_VARIANT is set:
With PKG_VERSION set: $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
Without PKG_VERSION: $(BUILD_DIR)/$(PKG_NAME)
Consequently, all PKG_BUILD_DIR definitions in our packages are
redundant. Remove them.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Build/Prepare and Build/Configure are not required for packages
which only contain local files and do not need any compilation.
Remove them.
Note that Build/Compile needs to be present and empty to overwrite
the defaults, though.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
uci-defaults scripts are supposed to be run once after firstboot
and then removed. However, the removal only takes place if the
subshell created for the sourced scripts returns exit code 0.
For some of the files, the last command returned a different exit
code, though, leading to the script remaining in its location and
being executed for every boot.
To prevent cases like the latter, this adds an "exit 0" to all
uci-defaults files in our package store. While at it, remove the
shebang for all these files since they are sourced (and not
executed).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Because nodewatcher is executed using a cron, but
our cron has no way to report the origin of a specific
log entry, a 'nodewatcher:' prefix is added to all debug
output.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Debug output is written to stderr now.
Therefore the output is happening in real time and
the current date and time are not necessary anymore.
Typically the date and time are added by the syslog
daemon.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This applies some tiny improvements to just-moved nodewatcher.d code:
- Remove comments about obvious things
- Introduce newlines to make code easier to read
- Use shorter conditional syntax for easy cases
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This splits up the data extraction/assembly of the nodewatcher
script into several parts and distributes them across packages, so
that each nodewatcher.d subscript is located in the package providing
the relevant functionality. This allows to extend the nodewatcher data
by enabling/disabling packages.
This scheme is not perfectly fulfilled for fff-network vs. fff-wireless,
as data cannot uniquely assigned there and the XML syntax does not allow
separation anyway.
In general, this moves code without applying code improvements, yielding
at an easy comparison of moved fragments. However, the following changes
were done to improve experience:
- The function writing debug output has been renamed from "err" to "debug"
- Since we catch the stdout of the nodewatcher.d functions anyway,
those scripts were adjusted to echo output directly instead of first
writing it into a variable and then outputting it at the end.
- The uci config has been kept, but initialization for the network part
has been moved to the fff-network package.
- Space indent has been changed to tab, which is more common in the
firmware and requires less space.
- Remove support for nodewatcher run without uci config. Script-based
nodewatcher on other platforms will have altered code anyway, and
splitting it up will prevent effective use as a blueprint for those
cases. After this change, nodewatcher in firmware is supposed to be
used only for this firmware.
Note that since the nodewatcher.d scripts are evaluated by using their
echo output, having a function created uncaught output to stdout there
will corrupt the XML.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
[rebase and adjustments for current master, use simpler mechanism to
call nodewatcher.d scripts, use tab indent, remove debug() definition
where not needed, do not remove uci config, add commit message, use
echo -n]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
[remove 'local' modifier for variable not inside a function, fix typo]
Signed-off-by: Fabian Bläse <fabian@blaese.de>
This follows the changes introduced in
6a25fd5ce5
This is a result of the switch to openwrt-19.07.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[fabian@blaese.de: Rebase onto fff firmware master]
Signed-off-by: Fabian Bläse <fabian@blaese.de>
This migrates to the new configuration architecture introduced
and required in
54af5a209e
This is a side-effect of the switch to openwrt-19.07.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[fabian@blaese.de: Rebase onto fff firmware master]
Signed-off-by: Fabian Bläse <fabian@blaese.de>
PKG_VERSION is meant to refer to the version of external packages,
as we do e.g. in the tunneldigger package.
For our own packages, we just need the PKG_RELEASE variable.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
[Rebased onto current state of master]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Currently, Makefile use a mixture of tabs and spaces with various
indents. This harmonizes all Makefiles to use tab indentation only.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Based on the documentation, BLA will only help if two nodes
are connected via WiFi AND via Ethernet cable on CLIENT ports!
For a "correct" setup, e.g. WiFi and BATMAN port connection,
BLA won't have an effect.
Since the former case is possible and there are no known
drawbacks, we enable BLA.
This removes the line to disable BLA, so it will be enabled as
B.A.T.M.A.N. enables it by default.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
According to the upstream repo, vis_mode has been removed since
batman-adv 2014.0.0.
See openwrt-routing/packages 8a66ed1.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Since there is a PKG_NAME variable, there is no need to repeat
the individual package name five times.
This makes editing and particularly copying Makefiles much
easier, as only the PKG_NAME has to be changed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This is not compatible with the old Batman!
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Adrian Schmutzler
Fabian Bläse
Tim Niemeyer
Christian Dresel