forked from freifunk-franken/firmware
fff-network: Make CLIENT default status for one-/two-port devices
The V2 firmware requires initialization of the WiFi interfaces by a hood file. If a one-port (or two-port) device is isolated, it won't get this information from other WiFi nodes (w2sta mode). In addition, it cannot be connected to the internet, as this would require the port to be in WAN mode. It is also not possible to connect a client device for configuration, since WiFi is not configured and the LAN port is in BATMAN mode. To enable configuration of an isolated one-port/two-port device, this patch thus changes the default port config to CLIENT, so the user can choose the desired configuration more easily. For two-port, we will have one port WAN and the second port CLIENT. Fixes #110 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Reviewed-by: Harald Thuemmler <int@bnhof.de> Reviewed-by: Fabian Bläse <fabian@blaese.de>
This commit is contained in:
parent
3856fff4be
commit
14622e20c2
|
@ -22,9 +22,9 @@
|
||||||
## For example this is the case for: gl-ar150, tl-mr3020-v1, tl-wa850re-v1,
|
## For example this is the case for: gl-ar150, tl-mr3020-v1, tl-wa850re-v1,
|
||||||
## tl-wa860re-v1, tl-wa901nd-v2, ubnt-bullet-m, ubnt-loco-m-xw, ubnt-nano-m,
|
## tl-wa860re-v1, tl-wa901nd-v2, ubnt-bullet-m, ubnt-loco-m-xw, ubnt-nano-m,
|
||||||
## ubnt-unifi
|
## ubnt-unifi
|
||||||
ETHMODE="BATMAN"
|
ETHMODE="CLIENT"
|
||||||
## Devices featuring 2 ethernet ports are configured by SPECIFIERs ressembling
|
## Devices featuring 2 ethernet ports are configured by SPECIFIERs ressembling
|
||||||
## the labels on the PORT itself. For the cpe210 these are called LAN0 and LAN1.
|
## the labels on the PORT itself. For the cpe210 these are called LAN0 and LAN1.
|
||||||
## Therefore they are configured as follows:
|
## Therefore they are configured as follows:
|
||||||
LAN0MODE="WAN"
|
LAN0MODE="WAN"
|
||||||
LAN1MODE="BATMAN"
|
LAN1MODE="CLIENT"
|
||||||
|
|
Loading…
Reference in New Issue
Block a user