This package connects to keyxchangev2
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This patch adds support for the WR841N v12. For TFTP recovery, the
image name has to be wr841nv11_tp_recovery.bin (with 11, not 12)!
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Dieses Patch fügt den Support für den WR1043 v4 hinzu. Dieses Patch
baut auf den LEDE Patch auf und darf erst nach dem LEDE Patch
applied werden.
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- This will fix the LEDs on LEDE
- We will lose the power heartbeat trigger on the LED
- We will lose the VPN signaling on the LEDs
While remove the default system config, the LEDE system now
configures wrong ntp service. We fix this by deleting these
entries in the fff-timeserver package.
If the file is already present on the devices, we need to upgrade it.
Therefore the 05-config-system-migration is now part of the fff-sysupgrade
package.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
5Ghz AdHoc is not working with current ath10k driver.
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Michael Fritscher <michael@fritscher.net>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- mv /etc/network.* files to package
- mv /etc/config/network to package
- also removes the bsp specific root_file_system
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
- mtu of 1528 is enough for no fragmentation
- also some cleanups
- interface 'bat' was never needed
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Changed mode of configurenetwork to 755
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
* adds openwrt patch
* adds networkconfig
power-LED is not working
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
[rebased to master]
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
- remove httpd from .config
- remove httpd startup from rc.local
- add crawldata path creation in nodewatcher
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
- moves the node<-->client ra rules to package fff-uradvd
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
also changed image comparing at sysupgrade to sha256 and added the related tool
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
also removed function board_clean from bsp files and board_postbuild from buildscript
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
suggested-by: Alexander Wunschik <freifunk@wunschik.net>
Co-Authored-by: Alexander Wunschik <freifunk@wunschik.net>
Co-Authored-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
This patch adds a prefix advertisment for each node. Every node get also
the IPs
* $prefix::MAC
* $prefix::link-local
* $prefix::1
::1 is duplicated so we need filtering to not forward data into the
network for ::1.
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Der TP-Link WA850RE ist von der Hardware baugleich mit dem WA860RE somit
wurde die Konfiguration zu größten Teilen kopiert. Der einzige
Unterschied ist der, das der Router keinen Durchgang für den Strom hat
und somit eine Steckdose blockiert.
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
With micrond it is possible that every package has its own crontab.
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
Reviewed-by: Steffen Pankratz <kratz00@gmx.de>
As we don't even have a DHCP server in the image.
Signed-off-by: Steffen Pankratz <kratz00@gmx.de>
Reveiwed-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
- 'hidden = 1' does not make sense for ad-hoc networks, they need the
SSID to be visible for cell merging to function properly
Signed-off-by: Steffen Pankratz <kratz00@gmx.de>
Reveiwed-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
brctl isn't part of OpenWRT anymore. Rewrite the client-count to bridge util
from iproute2 package.
Another alternative may be to use "batctl tl" but there we get false positives
for local interfaces.
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
Reviewed-by: Steffen Pankratz <kratz00@gmx.de>
This script is obsolete by the iproute2 bridge tool.
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
Reviewed-by: Steffen Pankratz <kratz00@gmx.de>
Only options or values which may contain spaces need them
Signed-off-by: Steffen Pankratz <kratz00@gmx.de>
Reviewed-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
Reviewed-by: Michael Fritscher <michael@fritscher.net>
This is a normal scenario:
-- %< --
originator last-seen (quality) nexthop [interface]: .. possible nexthops ..
A 0.270s (134) A [ w2mesh]: C ( 79) A (134)
B 0.170s (245) B [ w2mesh]: B (245)
C 1.850s (152) C [ w2mesh]: A ( 83) C (152)
-- >% --
Nodewatcher will send only the originator, last-seen, quality, nexthop
and the interface. Nothing about the possible nexthops. Because Netmon
can't show every Originator (to bad performance), we need some filtering,
to only see direct neighbors. At the moment Netmon stores only
originator == nexthop entries. And there is no other way to filter,
because Netmon has only this information.
But this may fail. The problem occurs, if A has a better connection
(e.g. via eth0) with leads to an quality of 255:
-- %< --
A 0.270s (255) A [ eth0]: C ( 79) A (255)
B 0.170s (245) B [ w2mesh]: B (245)
C 1.850s (204) A [ eth0]: A (204) C (152)
-- >% --
In this example, Netmon wouldn't show the connection to C.
This patch doesn't use the originator == nexthop filter. Instead a
filter like "originator is anywhere in the possible nexthops" is used.
With this, we can disable the filtering in Netmon and show at least that
there is directly connection. With the "batctl o" command it is not
possible to show the correct interface for this direct connection.
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>